Quintech Electronics QRM 16 x 16 RF Matrix Router

Description

IF and L-band RF Routing Matrix Switch: QRM 2500

The QRM 2500 IF and L-band routing matrix features a 16×16 RF matrix routing in a compact 1 RU enclosure. The QRM also features Quintech’s latestQ-ROUTE and Q-SENSE technology, which provides maximum reliability with internal and external signal path redundancy and auto re-route capabilities. The QRM’s operating frequency range covers 50 MHz to 2150 MHz. It also offers manual and automatic AGC modes with a range of -15dB to +16 dB in 0.5 dB steps with optional LNB Power and individual port control to support all modulation formats. The front panel LED’s allow monitoring of power supply and alarm status information.

Features & Benefits

  • Q-ROUTE Provides Internal Signal Path Redundancy by Automatically Re-routing Around a Failed Signal Path
  • Q-SENSE Provides External Signal Path Redundancy by Automatic Switching of Back-up Input Signals
  • Manual and Automatic AGC Modes with a Range of -15 dB to +16 dB in 0.5 Steps
  • Front Panel LED’s Allow Monitoring of Power Supply & Alarm Status
  • Modular design allows for easy system installations and expansion
  • Remotely controlled via web browser interface
  • Solid state switches provide seamless (nanoseconds) switching speeds
  • Maximize use of existing equipment with automated switching and scheduling’ no need for dedicated equipment
  • The rear panel design facilitates structured cable routing, eliminating confusing tangles of cables

Specifications

16×16 RouterL-BandIF
Operating Frequency:(950-2150 MHz)(50-200 MHz)
Frequency Response:+/- 1.5

+/- 0.4 dB Over any 36 MHz channel

+/- 2

+/- 0.6 dB Over any 36 MHz channel

Isolation
(input to input):65 dB65 dB
(output to output):60 dB60 dB
(input to output):50 dB Typ.55 dB Typ.
RF Input Power-10 dB to -70 dB-10 dB to -70 dB
Gain Range (manual mode)-15 dBm to +16 dB in 0.5 dB steps-15 dBm to +16 dB in 0.5 dB steps
Impedance50 Ω or 75 Ω50 Ω or 75 Ω
Output AGC level-10 dBm to -50 dBm-10 dBm to -50 dBm
Max. RF Output Power:-10 dBm-10 dBm
Input P1dB+2 dBm-3 dBm
OIP3+10 dBm+8 dBm
Input Return Loss:14 dB14 dB
Output Return Loss:14 dB14 dB
Noise Figure:<18 dB @ 0dB

<9.5 dB @ 16 dB

<18 dB @ 0dB

<9.5 dB @ 16 dB

Configurations:8×8, 8×16, 16×8, 16×16
RF Connectors:BNC (50 or 75 Ω), type “F” , SMA Connectors
AC Input Power:Auto ranging 100-240 VAC, 50/60 Hz
Local Control:Front panel keypad with LCD display
PC Remote Control:RS-232. RS 485, SNMP, Telnet or TCP/IP via customer supplied PC2
Software:Basic PC compatible operating software and command protocol included
Mechanical:16×16 in 1 RU 1.75″ H x 19″ W x 18.5″ D