Fujitsu IP-920E HD/SD Compact Video Encoder

The main functions of IP-920 Encoder are:

  • Best-in-class Video Fidelity MPEG-4 AVC (H.264) Video Encoder
  • Compact, Light and Half Width of IP-9500
  • Upgrade from SDTV to HDTV *optional
  • Ultra Low Latency Mode *optional
  • NIT (Carrier ID) support for Satellite Video Transmission
  • Robust Error Correction (FEC/ARQ)
  • Multiple interfaces
  • Archiving and File Transfer
  • Ancillary Features

Enhanced IP-920 can stream video more smoothly by supporting NIT (Carrier ID) and Ultra low latency of approx. 99ms. These new features are especially useful for streaming among remote sites such as plural countries, broadcasters and global companies. These new features enable to stream video seamlessly and simultaneously and you would not have to feel the distances through the video from your site.

Fujitsu IP-920 is an audio/video codec that utilizes advanced MPEG-4 AVC (H.264) encoding to perform real-time transmission of SDTV and HDTV at low bit rates over IP network. By utilizing sophisticated MPEG-4 AVC (H.264) compression algorithms, HDTV contents can be transmitted over existing enterprise IP networks. Robust error correction ensures high fidelity service over IP networks by preventing to distort decoding video, even when network packet losses occur. IP-920 reduces the transmission cost for communication among remote locations. IP-920 also meet with your requests with SDTV and HDTV video fidelity, compact size and rugged construction.

IP-920 has an analog video (NTSC/PAL) interface. The existing CCTV camera can reduce your beginning investment for your system. When the camera is replaced to HD camera, you can easily add the HD optional software to the IP-920 encoder. Utilizing the optional 16GB internal storage function, IP-920 can also be used for file transfers over IP networks. Encoded video can be recorded in the encoder and remotely downloaded. Therefore, video data can be transferred even when network bandwidth is too narrow to support real-time transmission.


IP-920 Specifications
ModelIP-920E (Encoder)IP-920D (Decoder)
VideoInput/Output1 x HD-SDI (SMPTE 292M)*1 / 
1 x HDMI, 1 x NTSC / PAL
1 x HD-SDI (SMPTE 292M)*1/ 
1 x HDMI, 1 x NTSC / PAL
CodingITU-T H.264 / MPEG-4 AVC (ISO/IEC 14496-10), HP@L4*1, MP@L4*1
ITU-T H.264 / MPEG-4 AVC (ISO/IEC 14496-10) HP@L3, MP@L3
Resolution, Frequency,
Bit Rate
1080i x 1920/1440/960 (50/59.94Hz) : 0.5 – 27Mbps,
720p x 1280/960/640 (50/59.94Hz) : 0.5 – 27Mbps,
480i x 720/352 (59.94Hz), 
576i x 720/352 (50Hz) : 300kbps – 10Mbps,
240i x 352 (59.94/29.97Hz), 288i x 352 (50/25Hz) : 25 -384kbps*2
Reference—-1 x Reference Input (BB)*6
AudioInput/Output2 x SDI embedded*4
(SMPTE 299M/272M), 
1 x HDMI, 1 x Balanced Analog pair 
(D-Sub 9 pin*5)
1 x SDI embedded 
(SMPTE 299M*1/272M), 1 x HDMI,
1 x Balanced Analog pair 
(D-Sub 9 pin*5)
CodingMPEG-1 Layer2 (ISO/IEC 11172-3) : 2ch (1 x Stereo) 128,256,384kbps/Stereo
MPEG-2 AAC (ISO/IEC 13818-7) : 2ch (1 x Stereo) 
Multiplexing MethodMPEG-2 TTS, MPEG-2 TS
Ancillary DataNIT (Carrier ID), SDT
Error CorrectionFujitsu FEC and ARQ, Pro-MPEG FEC
NetworkIPv4PPPoE, DHCP, SNTP, SNMP v2c, IGMP v2
ControlWeb GUI, SNMP
Additional functionsRecoding *3, Dual encoder, Superimpose—-
Network Interface1 x 10BASE-T/100BASE-TX
Data (outside MUX.)RS-232C (Pass-thru)
External Dimensions
(W x D x H)
210 x 300 x 42 mm (w/o protrusions)
WeightApprox. 2 kg
Power100 – 240 V (AC) / +12 – 24V (DC)
Power Consumption38VA (AC) / Max. 38.4W (DC)35VA
Temperature-10 – 55 degrees C
Humidity20 – 90 RH (No condensations)
CertificationsUL, CE, FCC, RoHS (AC, DC) KC (AC) / 
Class III device of IEC60950-1, UL60950-1, EN60950-1 (DC)

*1: IP-920E with HD optional software, IP-920D

*2: IP-900E ONLY

*3: Need Optional CF card

*4: Selectable 2ch (2 x Stereo) mode (Single Encoder) or 1ch (1 x Stereo) mode (Dual Encoder).

*5: Connector conversion cable is attached

*6: Decoder’s function

Note) HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licencing LLC.